Translate

Saturday, 11 June 2016

How to unbrick the US version of the LeTV Le1 Pro X800 (64GB)

















So you bricked your LeTV L1 Pro X800 US (64GB version) because you flashed a Chinese ROM? or something went wrong with TWRP? and now the device is stone dead with a black screen?

This is how to unbrick it, only if it is still found on the PC when connected as "Qualcomm HS-USB 9008" in device management. When it is bricked you can also not enter Recovery or Fastboot mode.

Follow this guide here on xda by viperdream26 (all credits goes to him!)
http://forum.xda-developers.com/leeco-le1-pro/how-to/leeco-le-1-pro-x800-hard-brick-fix-t3393161

Download the package "QFIL_X800_HARD_BRICK_FIX" from here: (my mirror)
https://mega.nz/#!G0ozxZwb!vowHBNjQGC1AtVOx2ThrWpYt6yHEnAACFvq90XDF4n0

After you have unbricked you must flash EFOX rom via Fastboot called x1_na_fastboot_Lang_EKL.rar (160519) to get the full storage again. Else you may only see 9GB storage after you unbricked. And you may also have problems with charging the phone. UPDATE 2, flash afterwards also this firmware here (160605) from EFOX.

Tips:
Hot to enter FASTBOOT? (Pinguin icon): is done with pressing POWER + VOLUME DOWN at the same time for some seconds until you see the Pinguin.

23 comments:

  1. S7yler thank you for the review and the guide. One question about the flashing procedure: do i need to flash both files or just the latest to upgrade the phone when it is new?

    ReplyDelete
    Replies
    1. I would flash Update1 first and after that then also Update2 on top.

      Delete
  2. hi
    i need help.
    i have on screen show only leecoo logo + recover for 2 sec and after, Pinguin icon, 2 vibration and starts again - logo... pinguin... vibration......
    what to do?

    ReplyDelete
    Replies
    1. previously I tried to root android using iRoot_1.8.8.20465_cid1005_7337ba1e

      Delete
  3. Replies
    1. yep.
      I did the same way as you.
      ended up with hard bricked phone.
      just go to xda (the link is in the OP) and follow step by step and you will revive your phone

      Delete
  4. Hellow i have ploblem with this phone.Not open and i can see nothing just black screen but i thing the phone can be in download mode and if input the computer looking Unknown Device but in the first looking this Qualcomm HS-USB 9008.thanks

    ReplyDelete
    Replies
    1. Follow this guide here on xda by viperdream26 (all credits goes to him!)
      http://forum.xda-developers.com/leeco-le1-pro/how-to/leeco-le-1-pro-x800-hard-brick-fix-t3393161

      Delete
  5. You are the best!!!!
    Thanks a lot.
    p.s.
    Have any newest uptade

    ReplyDelete
  6. Hi I do not know what I'm doing wrong.
    download more and is successful
    But I have not always a black screen.
    I have a 1 pro les us.
    Can you help me?

    ReplyDelete
    Replies
    1. did you follow the guide 100% on http://forum.xda-developers.com/leeco-le1-pro/how-to/leeco-le-1-pro-x800-hard-brick-fix-t3393161 ??? and did you also install the Qualcomm drivers? what windows do you use?

      Delete
    2. I think I've done everything.
      Using wind 10 64bit
      I used Qualcomm drives 429.
      The phone is always black and feel the beeps.
      I enter donwload mode only with vol up + vol down + power on / off.
      Where am I wrong?

      Delete
    3. I think you need to find someone with Windows 7 and 32bit mode. That would probably then work.

      Delete
    4. ok
      Tomorrow I try and let you know
      Thank you :-)

      Delete
    5. failed to install qualcomm drivers..i'm using win 7 32bit (stucked at thi step)

      Delete
  7. How exactly do i flash the efox rom and the update 2 .I have the fastboot opened i dont know the commands .will i loose my current rom ?

    ReplyDelete
  8. iroot did the same to my phone too crash it

    ReplyDelete
  9. This tuturial solved my problem best regards

    ReplyDelete
  10. saharafail error please help me

    ReplyDelete
  11. how do i flash EFOX rom via Fastboot

    ReplyDelete
  12. Hi S7yler. Got a black screen hard brick of le1 pro. Can you help? Phone has no reaction at button combinations, no penguin, nothing. Links on xda from oleg cheltemov are dead...

    ReplyDelete